Lubricate the oil filter element

A land leveller is a machine used in construction and agriculture to create a level surface on the ground. The machine is equipped with a large, flat blade that can move soil, sand, or gravel, allowing the operator to level a surface to a specified grade.

Here are the steps for operating a land leveller:

1. Before starting the machine, perform a quick inspection to ensure it is in good working condition. Check the engine oil, hydraulic fluid, and tire pressure.
2. Attach the land leveller to a compatible towing vehicle or machine.
3. Position the machine at the beginning of the area to be leveled.
4. Start the engine and engage the blade.
5. Move the machine forward, allowing the blade to pull soil or other material from high points and pushing it to lower points.
6. Adjust the blade angle using the controls to fine-tune the levelling.
7. Continue moving forward, adjusting the blade angle as necessary, until the entire area has been levelled to the desired grade.
8. Turn off the engine and disengage the blade.

Here are some additional tips for operating a land leveller safely:

1. Always follow the manufacturer’s instructions for the specific machine model.
2. Make sure the area to be levelled is clear of any obstacles or debris that could damage the machine or affect the levelling process.
3. Wear appropriate personal protective equipment such as steel-toed boots, high-visibility clothing, and hard hats.
4. Use caution when working on an incline or uneven terrain to prevent tipping.

In summary, the land leveller is a powerful machine used to level land in agriculture and construction. By following proper operating procedures and safety measures, the machine can be operated safely and effectively to achieve a level surface.