4J-0816

Hydraulic oil filter Element

The installation method of the filter is slightly different according to different types of filters. The following are the general filter installation steps: 1. First determine the type and model of the filter to ensure that you buy the right filter for your vehicle or machine. 2. Locate the filter, usually next to the engine bay or oil sump. 3. Remove the old filter, tools are required for removal. 4. Clean and inspect the installation location to make sure it is clean and free of impurities or excess oil. 5. Apply engine oil to the sponge ring and sealing ring of the new filter, and fix it on the thread at the bottom of the filter. 6. Install the new filter, pay attention to the correct installation position, and rotate the thread until the filter is fixed tightly. 7. After installing the filter, start the engine and check for oil and air leaks. It should be noted that different filters have different replacement cycles. When replacing filters, attention should be paid to the replacement cycle. Regular replacement of filters can avoid machine failure. If you’re not sure how to replace your filter, you can check your car or machine’s owner’s manual or consult a professional technician.